S244 Wood Stove
S244 Wood Stove

S244 Wood Stove

Regular price $799.00
Unit price  per 
Shipping calculated at checkout.


The S244 is EPA certified high efficiency wood stove among the smallest on the market.  This leg model is ideal for small areas that require a limited heating capacity without compromise on the appliance efficiency.


Fuel type Dry cordwood
Recommended heating area (sq.ft.) () 250 - 1,000
Overall firebox volume 1.3
Maximum burn time () 5 h
Maximum heat output (dry cordwood) (3) 40,000 BTU/h (11.7 kW)
Overall heat output rate (min. to max.) (3) (4) 10,800 BTU/h (3.2 kW) to 22,600 BTU/h (6.6 kW)
Average overall efficiency (EPA cribs / Douglas fir) (4) 68.0 % (HHV) (5) 73.5 % (LHV) (6)
Average overall efficiency (dry cordwood) (4) N.A. (HHV) (5) N.A. (LHV) (6)
Optimum efficiency (7) (8) 78.2 %
Average particulate emissions rate (1) 4.0 g/h
Average CO (9) 130.5 g/h
(1) This appliance is officially tested and certified by an independent agency.
(2) Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.
(3) The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
(4) As measured per CSA B415.1-10 stack loss method.
(5) Higher Heating Value of the fuel.
(6) Lower Heating Value of the fuel.
(7) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
(8) Optimum overall efficiency at a specific burn rate (LHV).
(9) Carbon monoxyde.

General features

Combustion technology Non-catalytic
High-efficiency EPA certified appliance Yes
Maximum log length 17"
Log positioning Over width
Chimney diameter 6"
Flue outlet diameter 6"
Type of chimney CAN/ULC S629, UL 103 HT (2100 °F)
Minimum chimney height (feet) 12'
Baffle type Stainless steel
Approved for an alcove installation Yes
Approved for a mobile home installation No
Shipping Weight 239 lb (108 kg)
Door type Single, glass with cast iron frame
Glass type Ceramic glass
Glass surface – dimensions (Width X Height) 12 1/2" X 8 1/8"
Glass air-wash system Yes
Overall dimension (Height) 26 3/4"
Overall dimension (Width) 22 5/8"
Overall dimension (Depth) 21 7/8"
Door opening – dimension (Height) 7 5/8"
Door opening - dimension (Width) 15"
Firebox – dimension (Height) 9 5/8"
Firebox – dimension (Width) 18"
Firebox – dimension (Depth) 12 1/4"
Firebox lined with refractory bricks for better heat distribution Yes
Stainless-steel secondary-air system improving gas combustion Yes
Model Legs
Steel thickness – body 3/16"
Steel thickness – top 3/16"
USA standard (emissions) EPA Method 28
Canadian Standard (emissions) CSA B415.1-10
USA standard (safety) UL 1482, UL 737
Canadian standard (safety) ULC S627
Tested and listed as per applicable standards By an accredited laboratory (CAN/USA)
Warranty Limited 5 years
Minimum clearances to combustibles* 
(Data expressed in inches. 1 inch = 25.4 mm)
  Canada United-States
  Single wall pipe Double wall pipe Single wall pipe Double wall pipe
Clearance – back wall 15 1/2" 10" 15" 10"
Clearance – placed in a corner 10" 10" 10" 10"
Clearance – side wall 18" 18" 18" 18"
Clearance – top (measured from the platform on which the appliance is installed)** 84" 84" 84" 84"

* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).

** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.

     Manual     Measurements